Dual Edge Aluminum Emulsion Scoop Coater for Screen Printing

• Transport Package: Box/ Carton
• Trademark: HANZE
• Origin: China
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Scoop Coater
• Production Capacity: 10000
• Package Size: 30.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 1.000kg

Product Description

Screen Printing Emulsion Coating Throgh
Scoop coater is a necessary tool for proper application of all direct liquid emulsions.
Our coater is one of the most price competitive and best designed emulsion scoop coaters in the screen printing industry.
They are designed for easy and comfortable handling while providing a smooth layer of emulsion on your screen.
The coating angle is designed on a perfect angle.
It's calibrated to give you a perfect coating of emulsion every time.

Dual edge (both thick and thin) design permits coating emulsion thicker or thinner on the screen.

Thinner coats are usually desirable on higher mesh count (200mesh and above) for half-tones and finer detail like 4-color process;
thicker coats are usually used for spot color on lower mesh counts (below 200mesh).

The scoop coaters are made tough with lightweight aluminum and molded plastic endcaps.

A well maintained and properly cleaned emulsion scoop coater should give you many years of trouble free performance.

Feature

Corrosion resistant

Dual coating edges

Removable end caps

Choose a Coater
Which Emulsion Scoop Coater Size Should I Use?
The most screens are measured to the outside diameter and there is about 4 inches of screen frame that doesn't need to be coated.For example: A 20x24 inch screen will only require a 16 inch scoop coater.
•14 Inch - use for 18" x 20" screens.
•16 Inch - use for 20" x 24" screens.
18 Inch - use for 23" x 31" screens.
•20 Inch - use for 25" x 36" screens.

Application
Coat the substrate side of the screen first.
Begin your coating pass at the bottom of the screen.
Firmly support your screen as you press the edge of the scoop coater against the mesh.
Move slowly up the screen and slow down to a stop near the top.
Twist the scoop coater upwards and off of the mesh.
Flip the screen quickly and repeat on the ink well side.